Semester Grade Calculator: How to Calculate Your Semester Grade
Last updated: November 5, 2026
A semester grade calculator helps you combine quarter grades, exam scores, and syllabus weights into one final semester percentage.
Most semester grades are not a simple average. If your course uses a quarter system, your semester grade usually follows a model like 40% Quarter 1 + 40% Quarter 2 + 20% final exam. Your syllabus decides the weights, and the formula is the same either way.
In this guide, you will see the exact semester grade formula, a worked example, and the steps to use when the final exam has not happened yet.
How to calculate your semester grade
The formula is a weighted average. Every graded part gets multiplied by its weight, and the results are added together.
Semester grade = (Quarter 1 × 0.40) + (Quarter 2 × 0.40) + (Final exam × 0.20)
Use decimals for weights, not whole numbers. A 40% weight becomes 0.40, and a 20% weight becomes 0.20. The weights in a semester grade formula should add to 1.00. If your weights are 50% and 50%, use 0.50 and 0.50. If they are 35%, 35%, and 30%, use 0.35, 0.35, and 0.30.
That is the same method a weighted grade calculator uses for course grades, repeated here with quarter weights instead of assignment weights.
Read your syllabus first
Read your syllabus first. The weights are usually printed near the top of the course grading section, next to the letter grade table. If your course does not use quarters, use the category weights printed there instead.
Do not guess the weights. A University of Texas at El Paso syllabus shows how a course can weight exams, homework, and participation, while a Seminole State College syllabus shows how one course splits its grade between exams and assignments. Each syllabus uses different weights, so the numbers in this guide are only an example.
How to calculate your semester grade by hand
If your syllabus uses a quarter model, work through the steps in order. Keep the quarter grades as percentages, and keep the weights as decimals.
Suppose your grades are 85% in Quarter 1, 92% in Quarter 2, and 88% on the final exam. Use the quarter model above: 40% Quarter 1, 40% Quarter 2, and 20% final exam.
- Convert the weights to decimals: 0.40, 0.40, and 0.20.
- Multiply each grade by its weight: 85 × 0.40 = 34.0, 92 × 0.40 = 36.8, and 88 × 0.20 = 17.6.
- Add the weighted scores: 34.0 + 36.8 + 17.6 = 88.4.
- Your semester grade is 88.4%.
- Round only at the end. If your school rounds to whole numbers, 88.4% becomes 88%.
What if the final exam has not happened yet?
When the final exam has not happened yet, use only the parts that are finished and divide by their combined weight.
- Write down the grades you already have. For this example, use 85% in Quarter 1 and 75% in Quarter 2.
- Find the average of the finished quarters: (85 + 75) ÷ 2 = 80%. This is the same as averaging the two scores first, then applying the weight.
- Multiply the average by the weight: 80 × 0.80 = 64.0. Use 0.80 because the two finished quarters cover 80% of the semester grade.
- Add the weighted scores: 34.0 + 30.0 + 8.0 = 72.0.
- Divide by the total weight of completed categories: 72.0 ÷ 0.80 = 90%.
Use a quarter model, not a straight average
A straight average treats every quarter and the final exam as equal. A quarter model does not. The final exam counts less than each quarter in the 40/40/20 model, so a strong exam cannot rescue two weak quarters on its own.
Use the table below to turn the final percentage into a letter grade. Your school sets its own bands, so check your syllabus if your cutoffs differ.
| Letter grade | Semester percentage |
|---|---|
| A | 90–100% |
| B | 80–89% |
| C | 70–79% |
| D | 60–69% |
| F | Below 60% |
Do not average letter grades. Convert each quarter to a percentage first, then use the formula. Averaging an A and a C does not give a B unless the numbers behind them average to the B band.
Common mistakes when you calculate a semester grade
Most errors come from the setup, not the arithmetic. Check these before you trust the result.
- Using a straight average instead of the syllabus weights.
- Adding the weights as whole numbers, for example 40 + 40 + 20 = 100, and then dividing by 100 again.
- Using the wrong weight for a quarter. If Quarter 1 is 40% and you use 30%, the answer changes.
- Rounding each step. Keep one decimal place until the final answer, then round once.
- Mixing points and percentages. If one quarter is out of 70 points and another is a percentage, convert the points to a percentage first. A University of Washington syllabus drops certain lowest scores in some courses, which changes the average before any weights are applied.
Frequently asked questions
How do I calculate my semester grade?
Add each quarter grade multiplied by its weight, then add the final exam multiplied by its weight. For a 40/40/20 split, the formula is (Quarter 1 × 0.40) + (Quarter 2 × 0.40) + (Final exam × 0.20).
What is a good semester grade?
A good semester grade is one that meets the goal you set for the course, usually a B (80–89%) or higher for most students. The exact band depends on your school, so check the letter grade table in your syllabus.
Can I calculate my semester grade before the final exam?
Yes. Use only the finished parts and divide by their combined weight. If Quarter 1 and Quarter 2 are done, your current standing is (Quarter 1 × 0.40 + Quarter 2 × 0.40) ÷ 0.80. That gives the grade you would have if the exam counted for nothing, so treat it as a current standing, not a prediction.
Do I add quarter grades together and divide by 2?
No, not if the final exam has a weight of its own. Adding the quarters and dividing by 2 ignores the exam entirely. Use the weighted formula with every part the syllabus lists, including the exam.
How do I calculate my semester grade from percentages?
Convert each part to a percentage first, multiply each percentage by its decimal weight, add the results, and divide by the total weight if any part is missing. If all parts are present and the weights add to 1.00, the sum is your semester grade.
Semester grade calculator: calculate your grade now
Write down the weights from your syllabus, enter each quarter grade as a percentage, and run them through the semester grade calculator. If a quarter is still in progress, recheck it with an average grade calculator first, then use a final grade calculator to see what grade do I need on my final. When the exam is over, come back and work out the weighted total with a finals grade calculator.
